Anti Yellowing Scratch Proof Tpu Paint Protection Film / Clear Vehicle Protection Film

factory customization anti yellowing scratch proof tpu ppf paint protection film

Advantages of DEMING PPF

Always new

• Paintworks become matter and faded over time. With subsequent maintenance this can be helped, but with each procedure we make irreversible interventions on the surface of the car. Either the layer of paint becomes thinner, or chemicals are applied to the surface that gradually wear out and lose its resistance. Deming PPF materials offer the strongest protection for paintworks. For many years, they surely protect from environmental influences.

What effects are we talking about?

• Dust: airborne dust at high speeds scratch the surface, and after some years of driving on the highway, it leaves a permanent mark on the paintwork
• UV radiation: the sun will eat all the ink, it's just a matter of time; solar radiation makes the layer of paint faded and causes premature aging of the lacquer layer
• Hailstorms: summer hail can do a lot of damage to the paintwork, we meet a lot of new cars that are completely disfigured by hail
• Extreme hot and cold temperatures: in high heat, the lacquer layer will soften and become very sensitive to surface scratches, while in winter the lacquer layer becomes rigid and can chip off easily

Protection against surface damages

In use, our car is exposed to a lot of mechanical impacts, and vandals can also cause a lot of inconveniences. The perfect protection against these factors is provided by Deming PPF materials. What impacts shall you think of more exactly?

• Stone chips: at high speed, even a tiny pebble piece can cause huge damage to the paintwork
• Parking: the door of the adjacent car is pushed to your car, or a shopping hits your car and causes unpleasant and lasting damage to the paintwork
• Vegetation: bushes and twigs hanging onto the road often scratch the entire side of the car
• Narrow parkways: we often scratch the bumpers, whose repair is time-consuming and costly, and generally will not be like the original any more
• Vandalism: Sometimes we are forced to leave our car in a place where there is a risk that we will find it with the doors scratched

Easy to clean
Earlier paint protection films were prone to yellowing and stains caused by dirt could not be removed. The concept of paint protection films was developed during the Gulf War to protect helicopter propellers which tended to suffer severe damages in sandstorms. These early products were later picked up by the automotive industry, but in their initial versions, appearance was not an important aspect; the very first products started to turn yellow in a few weeks, their cleaning was impossible. After a change of technology around the year 2006, the next generation of raw materials appeared, and these were much more resistant. However, white cars still had a problem with yellowing, and the removal of surface contamination was also an issue. The next development took place in 2010, which was a huge step forward, with the appearance of surface coated paint protection films. The surface of the film started to have a special coating that protects against discoloration, and the surface has also become significantly easier to clean - these films did not turn yellow on white cars. Nevertheless, there remained still some uncomfortable problems, such as the ability to remove heavy contaminants like bug stains, as well as the fact that the film surface still became dirtier more quickly than the uncoated parts. However, he ultimate technological solution appeared with the help of nanotechnology: the surface coating of the film became water repellent. From then on, even more critical contaminants can be easily removed and finally we can say that cleaning the film surface has become easier than a painted surface. The perfect paint protection film was born.

Product description

DEMING PPF has the best quality. Featuring a tougher entry-level topcoat, this film provides strong protection for vehicle paint while also protecting against contamination from environmental factors. With DEMING PPF, you can rest easy knowing your paint is protected without compromising on quality.

*Protects door sill as well as door handle cups, side door edgedust,scratch and shoe polish.

*Clear invisible film,easy to install.

*Keeps the car cleaning.

*TPU has thermal repair function.

*Protective film surface with wear-resisting layer,can reduce the formation of the scratch.

*Without fade or metamorphism because of high temperature.

*Excellent ductility for arbitrary angle sticking.

*Easy removal with no residual, will never damage your car.

Factory introduction

Hebei Deming New Material Technology Co., Ltd. is a company dedicated to the research, development, production and sales of world-class automotive paint protection films. It is located in Cangzhou City, Hebei Province, with a registered capital of 100 million yuan, an area of ​​10,000 square meters, an annual production capacity of 7 million meters, and 2 high-precision film casting production lines from Sumitomo of Japan and Nordson of the United States. High-quality raw materials and strict quality control are our guarantee of product quality.
Hebei Deming sincerely looks forward to working with you to jointly develop the market and achieve win-win success!
The company's operating team has more than 150 people, including design departments, R&D departments, production departments, marketing departments and customer service departments, etc., to jointly promote the development of the company.
The company has attracted nearly 20 middle and senior technical personnel from the United States and Japan, and has established long-term scientific research cooperation with nearly 10 scientific research institutes and dozens of mainstream suppliers at home and abroad, and is committed to the research and exploration of high-performance substrates.

Packaging & Stocking

Powerful warehousing capabilities and inventory management system

FAQ

►Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons.
►Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
►Q3. How about your delivery time?
A: Generally, All the items are in stock ,only 3days after receiving your advance payment.
►Q4.What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
►Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
►Q6: How do you make our business long-term and good relationship?
A:We keep good quality and competitive price to ensure our customers benefit ; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from!